Design of the analog front-end for the Timepix3 and Smallpix hybrid pixel detectors in 130 nm CMOS technology [Elektronisk resurs]
-
De Gaspari, Massimiliano (författare)
-
Alozy, Jerome (författare)
-
Ballabriga, Rafael (författare)
-
Campbell, Michael (författare)
-
Fröjdh, Erik 1984- (författare)
-
Idarraga, John (författare)
-
Kulis, S (författare)
-
Llopart, Xavier (författare)
-
Poikela, Toumas (författare)
-
Valerio, P (författare)
-
Wong, Winnie (författare)
-
Mittuniversitetet Fakulteten för naturvetenskap, teknik och medier (utgivare)
-
Medipix (medarbetare)
-
Medipix (medarbetare)
-
Medipix (medarbetare)
-
Medipix (medarbetare)
-
Radiation detection (medarbetare)
-
Medipix (medarbetare)
-
Medipix (medarbetare)
- 2014
- Engelska.
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 9, Art. no. C01037
-
Läs hela texten
-
Läs hela texten
-
Läs hela texten
Sammanfattning
Ämnesord
Stäng
- This paper describes a front-end for hybrid pixel readout chips, which was developed for the Timepix3 and Smallpix ASICs. The front-end contains a single-ended preamplifier with a structure for leakage current compensation which can handle both signal polarities, and a single-threshold discriminator with compensation for pixel-to-pixel mismatch. Preamplifier and discriminator are required to be fast, to allow a Time-Of-Arrival (TOA) measurement with a resolution of 1.56 ns. Time-Over-Threshold (TOT) is also measured; the monotonicity of TOT with respect to the input charge is greatly improved as compared to the previous Timepix chip. The analog area is only 55 μm × 13.5 μm. Timepix3 has already been fabricated and the first test results are also presented in this paper.
Ämnesord
- Engineering and Technology (hsv)
- Teknik och teknologier (hsv)
Indexterm och SAB-rubrik
- Front-end electronics for detector readout Electronic detector readout concepts (solid-state) Analogue electronic circuits Pixilated detectors and associated VLSI electronics
Inställningar
Hjälp
Beståndsinformation saknas